Showing posts with label new palettes. Show all posts
Showing posts with label new palettes. Show all posts

Friday, February 17, 2012

Metal vs Plastic watercolor palettes

QUESTION: Hi, Susie. I use tube paints and I'm wondering the differences between a metal palette and a plastic palette?  Which one is best?  I would like to keep my paints in the palette
and mist them to re-use the colors.  Any suggestions?   Debby


SUSIE'S REPLY: Debby-- Using the metal enameled butcher type trays for a watercolor palette is a very popular choice. When I began painting in the 60's I had several I used and I loved the extra large mixing areas. I can see how they would be ideal for mixing and pouring paint if you are into that technique. The metal palettes usually don't come with lids to protect the paint between uses.
The plastic palettes come in several shapes and sizes and many do have lids to help keep paints moist between painting sessions. These plastic palettes are lighter for taking with you when traveling back and forth to classes or for painting outside.

Which is best? I think it's a personal choice and it should be based on what works best for you.

My current palettes are the Richeson 22 well plastic palette (with lid) and the 32 well Jones Palette with lid. Both have flat bottom wells and large mixing areas without speedbumps. But those are my personal choices based on my painting style.

Thanks for writing!
SUSIE

Monday, February 21, 2011

Setting up a new watercolor palette

QUESTION: Susie, I have read your tips on setting out the watercolors in my brand new palette. I will follow the ideas of using the colorwheel to fill the wells (84) with empty wells in between to fill as new colors are added. Do I add glycerin and water to the colors as I put them in the palette wells? Do I empty the colors straight from the tubes into the palette? The palette has a cover, so that will help to keep the colors dust-free. Thank you for your help. I look forward to your advice. JHY

Susie's Reply:
Hello!
Thanks for writing! Before you squeeze out any paint check the tube to see if the paint has settled and separated. The binder in watercolors is gum arabic and it is clear gooey stuff that sometimes rises to the top of the tube if the tube has been setting for a while. You may need to kneed the tube or turn the tube upside down for 24 hours to let the pigments re-mingle with the binder.
When setting up the new palette squeeze the paint directly from the tube into the wells. You do not need to add anything to the paint. Some colors will be wetter than other colors naturally.
I have better luck when I fill the well about half full then stir the paint with a toothpick to evenly distribute it and make sure all the tiny air bubbles pop and the gum arabic is mixed in well. Allow it to dry then add more paint to fill the well. Stir to mix and level off the paint in each well. Leave the cover off to speed up the drying time. Dry it completely before using it if you have time.
When you are ready to paint, simply dampen the colors with your brush as you use them. Some colors will reconstitute easier than others.
DON’T spritz the whole palette with water to prepare your paint for painting. That will break them down and make the paint crumble.

84 wells will hold a lot of paint choices. Have fun!

SUSIE


PS. I forgot to add if your watercolor paint is a brand that contains honey it will not dry in the palette wells, it will always remain tacky and gooey. That type of paint is formulated to remain damp so it will not work for this suggested setup.

Monday, February 23, 2009

Beading problems with New Watercolor Palettes

QUESTION: Hi Susie, There must be a 'trick' to preparing the wells in my watercolor palette. I'm new to watercoloring and I've bought three different palettes and each one causes the paint to 'bead' up into a tiny little puddle that almost disappears before I start. What do I need to do to keep this from happening? Some tell me to clean the wells with Comet. It didn't help at all. MJ

SUSIE'S REPLY: Welcome to watercolor MJ! You have so much fun ahead of you!
Beading is definitely a common problem with new plastic palettes especially in the center of the palette where the all mixing takes place. They are so slick and smooth that the wet watercolor just beads up instead of making a nice puddle for you to work with.
What do you need to do to keep this from happening? The solution is simple.....just paint! It is an annoyance at first, especially when you are new to watercolor anyway, but I promise the more you mix and blend and use your palette the faster the mixing area will get "seasoned" and the beading will stop.
As for the wells, I always fill the wells with an generous amount of paint. I like to work with dry paint so I actually fill the wells and allow the paint to dry before I paint with it. Even if you prefer to use fresh paint, a generous squeeze of paint is better than a tiny dab. The lid will help the paint stay moist for quite a while, and if it does dry out you can rejuvenate it with a fresh dab of paint or a damp brush.
I don't recommend using a scouring powder on the plastic surface of your watercolor palette. They just scratch it and cause the surface to stain easier.
Another tip for watercolor palettes is to always use a damp paper towel or rag to wipe up your paint puddles. If you wipe them with a dry towel or rag you run the risk of pushing the paint into the plastic surface and staining your palette. All plastic palettes will be a little stained as you use them, but not enough to cause any problems.

I hope that helps! Have fun!
SUSIE